Lamp Test
The DSU/CSU supports a Lamp Test to verify that all LEDs are lighting and
functioning properly. All LEDs flash or blink on and off at the same time every
0.5 seconds during execution of the test. When the test is stopped, the LEDs are
restored to their normal condition.
If the Test Timeout configuration option is enabled and a Test Duration is set, the
Lamp Test stops when the test duration expires. See
page 6-10 for additional information.
7123-A2-GB20-00
Main Menu
Test
Lamp Test
September 2001
6. Troubleshooting
Test Timeout Feature
on
6-19