Physical Tests - Paradyne 7123 User Manual

6. Troubleshooting

Physical Tests

A 7123 DSU/CSU's physical tests screen for the network interface is shown below.
Physical Tests Screen Example
The ResetMon function key at the bottom of the screen only appears when a
Monitor 511 test pattern is Active. Select ResetMon to reset the monitor pattern
error counter.
6-12
Main Menu Test [Network Physical Tests/Data Port Physical Tests]
main/test/network
Device Name: Node A
Test
Local Loopbacks
Line Loopback:
Payload Loopback:
Remote Loopbacks
Send Line Loopback: Down
Pattern Tests
Send: user-defined 0a0a
Monitor: user-defined 0a0a
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
InjectERR ResetMon
September 2001
NETWORK 1 PHYSICAL TESTS
Command Status
Start Inactive
Start Inactive
Send Inactive
Stop Active
Stop Active
7123
09/09/2001 06:02
Results
0:00:00
0:00:00
0:00:00
0:00:00 - Errors 99999+
0:00:00 - Errors 99999+
MainMenu Exit
7123-A2-GB20-00