Paradyne 7123 User Manual page 51

3. Configuration
Table 3-8. SNMP Traps Options (3 of 3)
Link Traps Interfaces
Possible Settings: Network, T1s, Ports, All
Default Setting: All
Specifies which interfaces will generate linkUp, linkDown, and enterpriseSpecific trap
messages. These traps are not supported on the COM port.
Network – Generates these trap messages on the network interface only.
T1s – For applicable T1 DSU/CSUs, generates these trap messages for linkUp, linkDown,
and enterpriseSpecific events on both the T1 network and DSX-1 interfaces.
Ports – Generates these trap messages for linkUp, linkDown, and enterpriseSpecific
events on the user data port only.
All – Generates these trap messages for linkUp and enterpriseSpecific events on all
interfaces, except for the COM port, that are applicable to the model.
3-29
7123-A2-GB20-00 September 2001