Interfaces Group (Mib-2); Paradyne Indexes To The Interface Table (Iftable); Standards Compliance For Snmp Traps - Paradyne 7123 User Manual

B. SNMP MIBs and Traps

Interfaces Group (mib-2)

Clarification for objects in the Interfaces Group, as defined in RFC 1573 and
RFC 1213, which is an SNMPv1 MIB, is provided in this section.

Paradyne Indexes to the Interface Table (ifTable)

Table B-1, Paradyne Interface Objects
interface type, the ifDescr, and the ifIndex that Paradyne has assigned to each.
Table B-1.

Standards Compliance for SNMP Traps

This section describes the DSU/CSU's compliance with SNMP format standards
and with its special operational trap features.
The unit supports the following:
T
T
T
T
These traps are listed in alphabetical order within each table.
B-4
Paradyne Interface Objects Information
ifName Description
Physical Layer
Network T1 T1 network interface
Ethernet Ethernet Port
Sync Data Port Synchronous Data
S01P1 Port-1
COM Communications port
Trap: warmStart
Trap: authenticationFailure
Traps: linkUp and linkDown
Traps: enterprise-Specific
September 2001
Information, provides the ifName for each
ifDescr (ifEntry 2)
Network T1; T1 DSU/CSU;
Hardware Version: hhhh-hhh
Ethernet Port; T1 DSU/CSU;
Hardware Version: hhhh-hhh
Synchronous Data Port,
Slot: 1, Port: 1; T1 DSU/CSU;
Hardware Version: hhhh-hhh
COM Port; T1 DSU/CSU;
Hardware Version: hhhh-hhh
ifIndex
101001001
101006001
101003001
101004001
7123-A2-GB20-00