Frequencies & Channels - Tele Radio TIGER G2 Installation Instructions Manual

7. Select by pressing the left start button.
8. Select the time that you want for automatic shutdown: 0-255 minutes. If you want to turn off
automatic shutdown, select 0.
9. Press the left start button.
FREQUENCIES & CHANNELS
NOTE! If your system is transmitting on the frequency bands 433MHz eller 2.4 GHz, the receiver will
automatically detect and switch to the same channel that the transmitter is using. If your system is
transmitting on the 915 MHz frequency band, you have to switch bank in the receiver by using the PC
program Settings manager. Contact your representative for assistance.
Switch channel on the transmitter
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [Channel] or [Bank].
7. Go to the frequency table and select a channel.
8. Press the left start button.
- 55 -