Show Registered Pin Codes - Tele Radio TIGER G2 Installation Instructions Manual

5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [Erase RFID].
7. Scroll the list to select the RFID tag that you want to erase.
Press button 1 to move down.
Press button 2 to move up.
8. Select by pressing the left start button.
9. Confirm by pressing the left start button.

SHOW REGISTERED PIN CODES

1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [PIN] --> [Show PIN].
7. The display shows a list of all registered PIN codes.
- 47 -