Sun Systems Troubleshooting - Eaton NetDirector B064-016-04-IPH Manual

Appendix

Sun Systems Troubleshooting

Problem
Video display problems with HD15
interface systems (e.g. Sun Blade
1000 servers).*
Video display problems with
13W3 interface systems.
(e.g. Sun Ultra servers)*
The local and remote mouse
pointers do not sync.
* These solutions work for most common Sun VGA cards. If using them fails to resolve the problem, consult the Sun VGA card's manual.
86
Action
• The display resolution should be set to 1024 x 768 @ 60Hz:
Under Text Mode go to OK mode and issue the following commands:
setenv output-device screen:r1024x768x60 reset-all
Under XWindow:
1. Open a console and issue the following command: m64config -res 1024x768x60
2. Log out
3. Log in
• The display resolution should be set to 1024 x 768 @ 60Hz:
Under Text Mode go to OK mode and issue the following commands:
setenv output-device screen:r1024x768x60 reset-all
Under XWindow:
1. Open a console and issue the following command: ffbconfig -res 1024x768x60
2. Log out
3. Log in
See Manual Mouse Synchronization section.