Eaton NetDirector B064-016-04-IPH Manual page 62

Remote Session
Control Panel
Icon Function
Scan Ports
Connect Port
Ctrl+Alt+Del
On-Screen keyboard
Mouse Pointer
Mouse Sync Mode
Num Lock
Caps Lock
Scroll Lock
Macro
Macro List
Message Board
Virtual Media
Speaker
Open GUI
Custom Control Panel
62
Desription
Under an accessed port, click to begin Auto Scan Mode. The KVM over IP switch will
automatically switch among the ports that were selected for Auto Scanning with the Filter
function. This allows you to monitor their activity without having to switch among them
manually.
Click to select the port you wish to connect to.
Click to send a Ctrl+Alt+Del signal to the remote system.
Click to open the on-screen keyboard.
Click to select the mouse pointer type.
Note: This icon changes depending on which mouse pointer type is selected
Click to toggle Automatic or Manual mouse sync.
• When the selection is Automatic, a green √ appears on the icon.
• When the selection is Manual, a red X appears on the icon.
These icons show the Num Lock, Caps Lock and Scroll Lock status of the remote computer.
• When the lock state is on, the LED is lights orange and the lock hasp is closed.
• When the lock state is off, the LED is lights blue and the lock hasp is open.
Click on the icon to toggle the status.
Note: These icons and your local keyboard icons are in sync. Clicking an icon causes the corresponding LED on
your keyboard to change accordingly. Likewise, pressing a Lock key on your keyboard causes the icon's color to
change accordingly."
Click to open the Macros dialog box.
Click to display a dropdown list of user macros to access and run.
Click to open the message board.
Click to open the Virtual Media dialog box. The icon changes depending on the status of the
virtual media function.
Note: This icon displays in gray when the function is disabled or not available.
Enable/disable speaker.
Under an accessed port, click to recall the GUI.
Click to open more control panel functions.