Eaton NetDirector B064-016-04-IPH Manual page 49

OSD Operation
OOBC
Follow the steps below to setup and access the B064-Series
KVM Switch via dial-in modem:
1. Set up your hardware configuration to match the diagram
below. You will need to use Cat5e cable and an RJ45 to DB9
Adapter to connect the B064-Series KVM Switch's modem
port to the modem.
2. From your computer, use your modem terminal program to
dial into the B064-Series KVM Switch's modem.
B064-032-04-IPH
Note: If you don't know the B064-Series KVM Switch modem's serial
parameters, get them from the system administrator. An example of
setting up a modem terminal program under Windows XP is provided on
the next page.
3. Once the connection is established, open your browser, and
specify 192.168.192.1 in the URL box.
Note: The default username and password are blank.
From here, operation is the same as if you had logged in from
a browser or with the AP programs.
Security
The following section describes the settings found in the Security sub-section.
Connection Setup Example (Windows XP)
To set up a dial-in connection to the B064-Series KVM Switch
under Windows XP, do the following:
1. From the Start menu, select Control Panel
Connections Create a New Connection.
2. When the Welcome to the New Connection Wizard dialog
box appears, click Next to move on.
3. In the Network Connection Type dialog box, select Connect
to the network at my workplace and click Next.
4. In the Network Connection dialog box, select Dial-up
connection and click Next.
5. In the Connection Name dialog box, key in a name for the
connection and click Next.
6. In the Connection Availability dialog box, you can select
either Anyone's use or My use only, depending on your
preferences, then click Next.
Note: If you are the only user on this computer, this dialog box won't
appear.
7. In the Phone Number to dial dialog box, key in the phone
number of the modem connected to the B064 Series
KVM Switch (be sure to include country and area codes, if
necessary), then click Next.
8. In the Completing the New Connection Wizard dialog box,
check Add a shortcut to this connection on my desktop and
click Finish.
This completes the connection setup. Double click the
desktop shortcut icon to make a dial-in connection to the
B064-Series KVM Switch.
Network
49