Table of Contents
Advertisement
OSD Operation
Date/Time
The Date/Time page allows the user to set the date and
time parameters for the KVM switch. The following section
describes the settings on this page.
Blade Server Configuration
For Super Administrators and Administrators/Users who
have been given permission, when you access the Device
Management section with a Blade Server selected in the
Sidebar tree, its Configuration page appears.
54
Time Zone
• Select the Time Zone and City that most closely resembles
where the KVM switch is in using the drop-down menu at
the top of this section.
• If your area uses Daylight Savings Time, check the Daylight
Savings Time checkbox.
To manually set the date and time, do the following:
1. In the Date section, select the current month using the
drop-down menu.
2. If needed, click the < or > buttons in the Date section to
move backward or forward to the correct year.
3. In the calendar in the Date section, click on the current day.
4. In the Time section, enter in the current time using the 24
hour HH:MM:SS format.
5. Click the Set button in the Time section to apply your
changes.
Network Time
To have the time automatically synchronized to a network
time server, do the following:
1. Check the Enable Auto Adjustment checkbox.
2. Select a time server from the Preferred Time Server drop-
down list; or, check the Preferred Custom Server IP checkbox
and enter in the IP of your preferred time server.
3. If desired, repeat step two to enter an Alternate Time Server.
4. Key in the desired number of days between synchronization
in the Adjust Time Every __ Days field.
5. Click the Adjust Time Now button to synchronize
immediately.
Adding a Blade Server
To configure a new blade server, do the following.
1. Select its icon in the Sidebar tree, then click Add in the main
panel. The Setup Blade Server dialog box appears, with the
Step 1 tab displayed.
Advertisement
Table of Contents
Troubleshooting
