Eaton NetDirector B064-016-04-IPH Manual page 64

Remote Session
Control Panel
User Macros
The User Macros page allows you to add macros to the KVM
switch that can be performed on any of the connected
computers using the Macro List feature of the control panel.
(See Macro List section under Control Panel in Remote Session
Operation for details.) By default, the User Macros page is
displayed when the Hotkeys / Macros icon is clicked on. To
display the page when it isn't selected, click on the User
Macros button at the top of the Hotkeys / Macros screen.
To create a macro, follow the steps below.
1. Click the Add button on the right side of the screen.
2. In the name field that appears, key in a name for the macro
you are adding.
3. With the new macro highlighted, click the Record button on
the right side of the screen. Recording will begin and the
following panel will be displayed in the upper-left corner of
the remote screen.
4. Enter in the macro hotkey sequence and then click the Done
button. You will be returned to the User Macros screen, with
your macro name and hotkey combination added to the list.
Repeat this procedure for any additional macros you wish to
create.
Note: Clicking the Pause button will pause/unpause the recording
of the hotkey sequence. Clicking the Cancel button will cancel the
recording of the hotkey sequence. Clicking the Show button will
display the hotkeys as they are entered.
64
System Macros
The System Macros page allows you to add macros to the KVM
switch that can be performed automatically upon closing a
session. For example, you can create a macro that sends the
Winkey-L combination, causing a computer's login page to
come up the next time it is accessed. To display the System
Macros page when it isn't selected, click on the System Macros
button at the top of the Hotkeys / Macros screen.
To create a macro, follow the steps below.
1. Click the Add button on the right side of the screen.
2. In the name field that appears, key in a name for the macro
you are adding.
3. With the new macro highlighted, click the Record button on
the right side of the screen. Recording will begin and the
following panel will be displayed in the upper-left corner of
the remote screen.
4. Enter in the macro hotkey sequence and then click the Done
button. You will be returned to the System Macros screen,
with your macro name and hotkey combination added to
the list. Repeat this procedure for any additional macros
you wish to create.
Note: Clicking the Pause button will pause/unpause the recording
of the hotkey sequence. Clicking the Cancel button will cancel the
recording of the hotkey sequence. Clicking the Show button will
display the hotkeys as they are entered.
Once system macros are created, they are available to be
assigned to ports, with only one macro allowed per port. (See
the Port Configuration section under OSD Operation for details
on assigning system macros.)