Eaton NetDirector B064-016-04-IPH Manual page 65

Remote Session
Control Panel
Video Settings – The Video Settings screen allows you
to adjust the placement and picture quality of the remote
screen. The quality of the image display has a direct affect
on the keyboard and mouse response time. Higher quality
video results in more information being transferred over the
network, which can cause slow keyboard and mouse response
time in slower networks. Click this icon to open the Video
Settings screen.
The table below describes the contents of the Video Settings screen:
Setting Description
Screen Position Adjust the horizontal and vertical position of the screen using the Screen Position arrows.
Auto Sync Click this button to automatically detect the vertical and horizontal position settings of the remote screen. If
the local and remote mouse pointers are not synced, performing this function will normally bring them back
into alignment. If Auto Sync fails to align the screen properly, use the Screen Position arrows to make manual
adjustments.
RGB Move the RGB (Red, Green, Blue) slider bars to adjust the corresponding color component of the video
image. Check the Set to Grayscale checkbox to display the video of the remote computer in black and white.
If the remote keyboard and mouse response time is slow or choppy, checking the Set to Grayscale option can
speed them up.
Gamma This section allows you to adjust the video display's gamma level. This function is discussed in detail in the
Gamma Adjustment section following this table.
Performance Use the slide bar to select the Internet connection type used by the local client computer. The switch will use
that selection to automatically adjust the Video Quality settings to optimize the quality of the video display.
Since network conditions vary, if none of the preset choices appear to work well, you can select Advanced and
use the Video Quality slider bar to adjust the settings to suit your conditions.
Video Quality Drag the slider bar to adjust the overall quality of the video of the remote computer. On slower networks,
lowering the video quality can help improve keyboard and mouse response time.
Enable Refresh The remote screen can be set to be redrawn every 1 to 99 seconds, eliminating unwanted artifacts that would
otherwise remain on the screen. Click the Enable Refresh checkbox to activate this feature, and then enter in
the desired refresh rate.
Transparency Adjusts the transparency of the toolbars displayed by the Windows and Java clients. Move the slider bar until
the transparency is set to the desired level.
65