Eaton NetDirector B064-016-04-IPH Manual page 44

OSD Operation
Advanced Network Management Settings
f) In the list that comes up, select userprofile, then click OK to
complete step 2 of the procedure.
Step 3 - Edit Active Directory Users With the Extended
Schema:
a) Run ADSI Edit. (Installed as part of the Support Tools.)
b) Open Domain, and navigate to the cn=users dc=tripplite
dc=com node.
c) Locate the user you wish to edit.
44
d) Right-click on the user's name and select Properties .
e) On the Attribute Editor page of the dialog box that appears,
select userprofile from the list.
f) Click Edit to bring up the String Attribute Editor:
g) Replace the value shown with su/xxxx, where xxxx
represents the username assigned to the user in the
KVM switch. User access rights will be the same as those
that were assigned to them in the KVM switch. (See User
Management section for details.)