Eaton NetDirector B064-016-04-IPH Manual page 33

OSD Operation
User Management
3. The group information screen that appears is similar to the
user information screen, except that the Status section is
not displayed. Edit the group information the same as with a
user account.
4. When your selections have been made click Save.
5. When the Operation Succeeded popup appears, click OK.
6. Click Group in the List panel to return to the main screen.
The new group appears in the list and in the main panel, as
well.
At this point you can do any of the following:
• Assign users to the group by selecting the Members tab in
the group's notebook. (See Assigning Users to a Group from
the Group's Notebook section under User Management for
details.)
• Assign port access rights for a group by selecting the
Devices tab. (See Device Assignment section for details.)
• Add more groups and/or users and finish configuring the
group account later.
Groups – Modifying Groups
To modify a group, do the following:
1. Click the group's name in the Group list or select the group's
name in the Main Panel and click Modify.
2. Make any necessary changes to the group account and click
Save.
Groups – Deleting Groups
To delete a group do the following:
1. Select the group's name in the main panel and click Delete.
2. A confirmation dialog box will appear asking if you are sure
you want to delete the selected group account. Click OK.
Assigning Users to Groups
There are two ways to assign users to a group and remove
them from a group; via the User's notebook or Group's
notebook.
Assigning Users to a Group via the User's Notebook
To assign a user to a group from the User's notebook, do the
following:
1. Select the user's name from the User List or select the
user's name from the Main Panel and click Modify.
Note: Super Administrators can not be assigned to a group, as they
already have access to the entire installation.
2. When the user's notebook appears, select the Groups tab. A
screen similar to the one below appears:
3. In the Available column, select the group that you want the
user to be in.
4. Click the Right Arrow to put the group's name into the
Selected column and click Save.
Removing Users From a Group via the User's Notebook
To remove a user from a group from the User's notebook, do
the following:
1. Select the user's name from the User List or select the
user's name from the Main Panel and click Modify.
2. When the user's notebook appears, select the Groups tab. A
screen similar to the one below appears:
3. In the Selected column, select the group that you want to
remove the user from.
4. Click the Left Arrow to remove the group's name from the
Selected column and put it back into the Available column.
Click Save.
33