Eaton NetDirector B064-016-04-IPH Manual page 32

OSD Operation
User Management
At this point you can do any of the following:
• Assign the new user to a group by selecting the Groups tab
in the user's notebook. (See Assigning Users to a Group from
the User's Notebook section under User Management for
details.)
• Assign port access rights for a user by selecting the Devices
tab. (See Device Assignment section under User Management
in OSD Operation for details.)
• Add more users and/or create groups and finish configuring
the user account later.
Modifying User Accounts
To modify a user account, do the following:
1. Select the desired user's name from the User List or the Main Panel and click Modify.
2. The same as when creating an account, make any necessary changes to the user account and click Save.
Deleting User Accounts
To delete a user account, do the following:
1. Select the desired user's name from the Main Panel and click Delete.
2. A confirmation dialog box will appear asking if you are sure you want to delete the selected user account. Click OK.
Groups
Groups give Administrators and Super Administrators a convenient way to efficiently manage users and devices. Since device
access rights apply to anyone who is a member of the group, administrators need only set them once for the group, instead of
having to set them for each user individually. Multiple groups can be defined to allow some users access to specific devices, while
restricting other users from accessing them.
Groups – Creating Groups
To create a group, do the following:
1. Highlight Groups in the Groups List on the left side of the
screen.
Note: When accessing the OSD via web browser, you will need to click
the Groups sub-section tab first.
2. Click Add at the bottom of the main panel. The Group
notebook opens, with the Group tab selected:
32