Super Administrator Setup; First Time Setup; Network Setup - Ip Address Determination - Eaton NetDirector B064-016-04-IPH Manual

Super Administrator Setup

The B064-Series KVM Switches supports three types of users:
User Type Description
Super Super Administrators have full access to all Ports and Devices in the KVM installation. They can manage all
Administrator aspects of the installation.
Administrators have access to Ports and Devices that are authorized by the Super Administrator. They can
Administrator
manage Users and Groups and configure their personal working environment.
Users can access Ports and Devices authorized by Super Administrators or Administrators and they can
User
configure their personal working environment.

First Time Setup

Once the B064-Series KVM Switch has been installed, the Super Administrator must prepare the unit up for user operation by
setting the network parameters and adding users.

Network Setup - IP Address Determination

If you are an administrator logging in for the first time, you
must access the B064-Series KVM Switch in order to give it
an IP address to which users can connect. B064-Series KVM
switches support both standard IPv4 and IPv6. There are
three methods of doing this: Local Console, IP Installer and
Browser.
1 . Local Console
After the local console has been connected and the B064-
Series KVM Switch is turned on, a login prompt appears on
the console monitor:
Log in using the default Username: administrator and
Password: password. For security purposes, it is strongly
recommended that you change these to a unique Username
and Password. (See Changing the Super Administrator Login
section for instructions.)
After you successfully log in, the Local Console Main Screen
appears:
1. Click the Device Management icon at the top of the screen.
2. On the screen that appears on the right-hand side of the
page select the Network tab.
11