Eaton NetDirector B064-016-04-IPH Manual page 53

OSD Operation
Security
Certificate Signing Request
The Certificate Signing Request section provides an automated way of obtaining and installing a CA signed SSL server certificate.
To perform this operation, follow the steps below.
1. Click the Create CSR button. The following dialog box appears.
2. Fill in the form with the appropriate information for your company. The table below is an example of a filled out form.
Field
Country (2 letter code)
State or Province
Locality
Organization
Unit
Common Name
Email Address
3. When all fields have been filled out (all fields are required), click the Create button.
4. Click the Get CSR button, and then save the certificate file to a convenient location on your computer. This is the file that you
give to the third party CA to apply for their signed SSL certificate.
5. After you have received the certificate from the third party CA, save it to a convenient location on your computer. In the
Certificate Signing Request section of the Security page, click the Browse button and navigate to and select the certificate.
6. Click the Upload button.
Note: When uploading the file, the KVM checks to make sure the specified information still matches. If it does, the file is accepted. If it does not
match, the file will be rejected. If you want to remove the certificate (e.g. to replace it with a new one because of a domain name change), click the
Remove CSR button.
Example
US
US
OH
Your Company, Ltd.
Techdoc Department
www.mycompany.com
Note: This entry must be the exact domain name of the site that you want the certificate to be valid for. If the site's
domain name is www.mycompany.com, and you enter mycompany.com, the certificate will not be valid.
administrator@yourcompany.com
53