Eaton NetDirector B064-016-04-IPH Manual page 42

OSD Operation
Advanced Network Management Settings
LDAP Configuration — Active Directory
To allow authentication and authorization for the B064-Series
KVM Switch via LDAP, the Active Directory's LDAP Schema
must be extended so that an extended attribute name for
the B064-Series KVM Switch – userprofile – is added as an
optional attribute to the person class.
• Authentication refers to determining the authenticity of the
person logging in.
• Authorization refers to assigning permission to use the
device's various features.
In order to configure the LDAP server, you will have to
complete the following procedures: 1) Install the Windows
2003 Support Tools; 2) Install the Active Directory Schema
Snap-in; and 3) Extend and Update the Active Directory
Schema.
Install the Windows 2003 Support Tools
1. On your Windows Server CD, open the Support
2. In the right panel of the dialog box that comes up, double click SupTools.msi.
3. Follow along with the Installation Wizard to complete the procedure.
Install the Active Directory Schema Snap-in
1. Open a Command Prompt.
2. Key in regsvr32 schmmgmt.dll to register schmmgmt.dll on your computer.
3. Open the Start menu. Click Run and key in mmc /a. Click OK.
4. On the File menu of the screen that appears, click Add/Remove Snap-in, then click Add.
5. Under Available Standalone Snap-ins, double click Active Directory Schema, click Close and click OK.
6. On the screen you are in, open the File menu and click Save.
7. For Save in, specify the C:\Windows\system32 directory.
8. For File name, key in schmmgmt.msc.
9. Click Save to complete the procedure.
Creating a Start Menu Shortcut Entry
To create a shortcut entry on the Start Menu for the Active Directory Schema, do the following:
1. Right click Start; select: Open all Users
2. On the File menu, select New
3. In the dialog box that comes up, browse to or key in the path to schmmgmt.msc (C:\Windows\system32\schmmgmt.msc) and
click Next .
4. In the dialog box that comes up, key in Active Directory Schema as the name for the shortcut, then click Finish .
42
Tools folder.
Programs Administrative Tools.
Shortcut
Note: To quickly access the LDAP attribute, users can type the word get
into the Terminal command line.