Eaton NetDirector B064-016-04-IPH Manual page 22

OSD Operation
Connections
Scan
The Scan function automatically switches among all the ports
accessible to the logged-on user at regular intervals, allowing
their activity to be monitored automatically. (See Auto Scanning
section under Remote Session Operation for details.) Note: The
Scan icon will not appear when accessing the KVM switch via web
browser.
Panel Array Mode
Panel Array Mode also permits port activity to be monitored
automatically. The screen displays a grid of panels, each
representing a port on the installation. Only ports that are on
line and user accessible are displayed. Off-line or non-accessible
ports are left blank. (See Panel Array Mode section under The
OSD Toolbar in Remote Session Operation for details.)
Filter
Filter allows you to control which ports are displayed in the
Port Selection List, as well as which ports are scanned when
Auto Scan Mode is invoked. When you click Filter, the bottom of
the panel changes to look similar to the figure, below:
All – with no other filter options selected, lists all of the ports
on the installation.
• Putting a check mark in the Powered On checkbox lists only
the ports that have their attached devices powered on.
• The text input box and Search button allow you to key in a
search string so that only port names that match what you
key in show up in the list.
22
Interactive Display Panel
The Connections sub-section will display port status
information on the Device Level and port connection and
configuration options at the Port Level.
Device Level
When a KVM switch is selected in the Sidebar tree, the
Connections sub-section will display a list of the ports that are
accessible to the logged-on user.