Danfoss VLT HVAC Drive FC 131 Programming Manual page 140

VLT® HVAC Drive FC 131
Programming Guide
Table 296: Range:
Min: -200%
16-09 Custom Readout
Default value: 0 CustomReadoutUnit
Conversion index: -2
View the user-defined readouts as defined in parameter 0-30 Custom Readout Unit, parameter 0-31 Custom Readout Min Value, and
parameter 0-32 Custom Readout Max Value.
Table 297: Range:
Min: 0 Max: 9999 CustomReadoutUnit
4.13.2 16-1* Motor Status
Parameters for reading the motor status values.
16-10 Power [kW]
Default value: 0 kW
Conversion index: -3
Display the actual motor power in kW. The value shown is calculated on the basis of the actual DC-link voltage and DC-link current.
Table 298: Range:
Min: 0 kW
16-11 Power [hp]
Default value: 0 hp
Conversion index: -3
View the actual motor power in hp. The value shown is calculated based on the actual DC-link voltage and DC-link current.
Table 299: Range:
Min: 0 hp
16-12 Motor Voltage
Default value: 0 V
Conversion index: 0
View the motor voltage, a calculated value used for controlling the motor.
Table 300: Range:
Min: 0 V
16-13 Frequency
Default value: 0 Hz
Conversion index: -1
View the motor frequency, without resonance damping.
140 | Danfoss A/S © 2022.05
Max: 200%
Parameter type: Range
Data type: int32
Parameter type: Range
Data type: u_int32
Max: 1000 kW
Parameter type: Range
Data type: u_int32
Max: 1000 hp
Parameter type: Range
Data type: u_int32
Max: 65535 V
Parameter type: Range
Data type: u_int32
Default value: 0%
2-setup: 1 setup
Change during operation: True
Default value: 0 CustomReadoutUnit
2-setup: 1 setup
Change during operation: True
Default value: 0 kW
2-setup: 1 setup
Change during operation: True
Default value: 0 hp
2-setup: 1 setup
Change during operation: True
Default value: 0 V
2-setup: 1 setup
Change during operation: True
AU370727746889en-000101 / 130R0994
Parameters