Danfoss VLT HVAC Drive FC 131 Programming Manual page 134

Hide thumbs Also See for VLT HVAC Drive FC 131:
Table of Contents

Advertisement

VLT® HVAC Drive FC 131
Programming Guide
4.12.2 15-3* Alarm Log
Parameters in this group are array parameters, where up to 10 fault logs can be viewed. [0] is the most recent logged data, and [9]
the oldest. Fault codes, values, and time stamp can be viewed for all logged data.
15-30 Alarm Log: Error Code
Default value: 0
Conversion index: 0
View the fault code and lookup its meaning in chapter Troubleshooting.
Table 269: Range:
Min: 0
15-31 InternalFaultReason
Default value: 0
Conversion index: 0
View a description of the error. This parameter is used with alarm 38, Internal Fault.
Table 270: Range:
Min: -32767
15-32 Alarm Log: Time
Default value: 0 s
Conversion index: 0
View the time when the logged event occurred. Time is measured in seconds from the drive start-up.
Table 271: Range:
Min: 0 s
Max: 2147483647
4.12.3 15-4* Drive Identification
Parameters containing read-only information about the hardware and software configuration of the drive.
15-40 FC Type
Default value: 0
Conversion index: 0
View the FC type code. The readout is identical to the drive series power field of the type code definition, characters 1–6.
Table 272: Range:
Min: 0
15-41 Power Section
Default value: 0
Conversion index: 0
View the FC type code. The readout is identical to the drive series power field of the type code definition, characters 7–10.
Table 273: Range:
Min: 0
134 | Danfoss A/S © 2022.05
Parameter type: Range
Data type: u_int16
Max: 255
Parameter type: Range
Data type: int16
Max: 32767
Parameter type: Range
Data type: u_int32
Parameter type: Range
Data type: VisibleString
Max: 6
Parameter type: Range
Data type: VisibleString
Max: 20
2-setup: 1 setup
Change during operation: True
Default value: 0
2-setup: 1 setup
Change during operation: True
Default value: 0
2-setup: All setups
Change during operation: False
Default value: 0 s
2-setup: 1 setup
Change during operation: False
Default value: 0
2-setup: 1 setup
Change during operation: False
Default value: 0
Parameters
AU370727746889en-000101 / 130R0994

Advertisement

Table of Contents
loading

Table of Contents