Danfoss VLT HVAC Drive FC 131 Programming Manual page 95

VLT® HVAC Drive FC 131
Programming Guide
[5] Drive running
[6] Running/no warning
[7] Run in range/no warning
[8] Run on ref/no warning
[9] Alarm
[10] Alarm or warning
[12] Out of current range
[13] Below current, low
[14] Above current, high
[16] Below speed, low
[17] Above speed, high
[19] Below feedback, low
[20] Above feedback, high
[21] Thermal warning
[22] Ready, no thermal warning
[23] Remote, ready, no thermal warning
[24] Ready, voltage OK
[25] Reverse
[26] Bus OK
[35] External interlock
[36] Control word bit 11
[37] Control word bit 12
[41] Below reference, low
[42] Above ref, high
[45] Bus control
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[70] Logic rule 0
[71] Logic rule 1
Danfoss A/S © 2022.05
Parameters
AU370727746889en-000101 / 130R0994 | 95