Moving The Cursor And Changing Parameter Values - Yamaha MONTAGE M6 Quick Manual

By using the touchscreen
Tap the appropriate tab shown on the touchscreen.

Moving the cursor and changing parameter values

Use the four cursor buttons on the dial ring to move the cursor on the touchscreen in four directions.
You can move the cursor by touching the item shown on the touchscreen.
Change the parameter value at the cursor position by using the data dial, [INC/YES] button, and [DEC/NO] button.
For parameters with large value ranges, you can increase the value by 10 by holding down the [SHIFT] button and pressing the
[INC/YES] button. To decrease by 10, hold down the [SHIFT] button and press the [DEC/NO] button.
Cursor buttons
By moving a cursor position to a different row of the parameters using the up and down buttons, you can control a different set
of parameters using the display knobs
Edit
Main Category
General Perf
/ Pitch Settings
Filter Zone
/ Amp Overview
USB
Effect
Monitor
Audio ln Pitch
Arp / MS
Control
Main Category Sub Category
Decreases
number
1 2 3 4 5 6 7 8
Common
Sub Category Performance Name
Piano Acoustic
Data dial
Increases
number
90
FX
[ ]
T
CFX + FM EP
1. Move the cursor up and down to
select a different row.
2. Use the display knobs to control
the indicated parameters.
39
MONTAGE M Quick Guide