Basic Operation And Displays; Moving The Cursor - Yamaha montage6 Owner's Manual

The MONTAGE features a convenient touch panel display. You can operate various settings and select desired parameters by
directly touching the screen. Furthermore, you can use the data dial and other buttons for display operations.
Display (touch panel) configuration
This section explains the navigation bar and the display
selecting tabs which are common to all types of displays. For
the purpose of illustration, the Live Set display which
appears when the MONTAGE is turned on and the
Performance Play display (Home) are used as examples.
NOTE
You can change the start-up display (the display that first appears
when the power is turned on). For details about the setting, see
page 45.
Live Set display
1 2 3
HOME icon
1
Moves to the Performance Play display.
2 EXIT icon
Functions same as the [EXIT] button on the panel. Press
this icon to exit from the current display and return to the
previous level in the hierarchy.
INFORMATION area
3
Displays helpful information, including the currently
selected display name.
4 EFFECT icon
Touch the icon to call up the Effect switch display. The
icon turns off when any of the Effect blocks (Insertion,
System or Master) is off.
QUICK SETUP icon
5
Displays the settings of Local Control ON/OFF and MIDI
IN/OUT.
The keyboard-shaped icon lights up when Local Control
is set to ON and turns off when Local Control is set to
OFF.
When MIDI is set as the MIDI IN/OUT setting, a MIDI
connector-shaped icon appears. When USB is set as the
MIDI IN/OUT setting, a USB connector-shaped icon
appears.
16
MONTAGE Owner's Manual

Basic Operation and Displays

Navigation bar
4 5 6 7
Touch the desired icon to call up the corresponding
quick setup display.
6 TEMPO SETTING icon
Displays the tempo of the currently selected
Performance. Touch the icon to call up the Tempo setting
display.
UTILITY icon
7
Touch the icon to call up the last opened display among
the Utility displays.
Performance Play display
9
LIVE SET icon
8
Touch the icon to call up the Live Set display.
9 Display selecting tabs
Touch the desired tab to call up the corresponding
display.

Moving the cursor

Use these four buttons to navigate the display, moving the
cursor around the various selectable items and parameters
in the screen. When selected, the relevant item is highlighted
(the cursor appears as a dark block with inverse characters).
You can change the value of the item (parameter) at which
the cursor is located by using the data dial, [INC/YES] and
[DEC/NO] buttons.
8