Moving The Cursor And Setting Parameters - Yamaha MO6 Owner's Manual

Moving the Cursor and Setting Parameters

Moving the cursor
Use these four buttons to navigate the display, moving
the cursor around the various selectable items and
parameters in the screen. When selected, the relevant
item is highlighted (the cursor appears as a dark block
with inverse characters). You can change the value of
the item (parameter) at which the cursor is located by
using the data dial, [INC/YES] and [DEC/NO] buttons.
Inputting a number directly
For parameters having large value ranges (such as the Song measure), you can also enter the value directly, using the
buttons below the LCD display as a numeric keypad. When the cursor is located on such a parameter, the [NUM] icon
appears at the lower right corner of the LCD display indicating that you can call up the number input window by pressing the
[INFORMATION] button. From this window, you can input a number directly by pressing the [F1] – [F6] buttons and the [SF1]
– [SF5] buttons (or Number [1] – [10] buttons). First, press the [F6] button so that the cursor appears at the Input Number
within the bracket. Move the cursor to the desired digit by using the Cursor buttons [>] and [<], then input the number of the
selected digit. After completing the number input, press the [ENTER] button to actually enter the number. Press the [EXIT]
button to go back to the original display.
SCENE
SF1 SF2
F1 F2
n
You can also input a number directly by pressing the Number [1] – [10] buttons. In this case, the [10] button is used to input "0."
Selecting a note type
When the cursor is located on the parameter to which the note type is set, the note icon appears at the lower right corner
indicating that you can call up the Note Type selection window by pressing the [INFORMATION] button. You can specify the
note type by pressing the [F1] – [F6] buttons and the [SF1] – [SF5] buttons. After selecting one of the note types, press the
[ENTER] button to actually enter the selection. Press the [EXIT] button to go back to the original display.
SCENE
SF1 SF2
F1 F2
DEC/NO
EXIT
SF3 SF4 SF5 INFORMATION
F3 F4 F5 F6
SF3 SF4 SF5 INFORMATION
F3 F4 F5 F6
Moving the Cursor and Setting Parameters
Changing (editing) parameter values
Rotating the data dial to the right (clockwise) increases
the value, while rotating it to the left (counter-clockwise)
decreases it.
For parameters with large value ranges, you can
INC / YES
increase the value by 10 by simultaneously holding
down the [INC/YES] button and pressing the [DEC/NO]
button. To decrease by 10, do the opposite;
simultaneously hold down the [DEC/NO] button and
press the [INC/YES] button.
ENTER
EXECUTE
Number Input window
SCENE
SF1 SF2 SF3 SF4
F1 F2 F3 F4
Note type selection window
SCENE
SF1 SF2 SF3 SF4
F1 F2 F3 F4
SF5 INFORMATION
F5 F6
SF5 INFORMATION
F5 F6
Owner's Manual 35