Brake Control; Specification Brake Control F6-A / S6-A Or F6-P S6-P; Specification Brake Control F6-K / S6-K - KEB COMBIVERT F6 Programming Manual

Brake control

4.2 Brake control
WARNING

Specification brake control F6-A / S6-A or F6-P S6-P

For more information, please refer to the instruction manual of the safety module
and the installation instructions of the control board.

Specification brake control F6-K / S6-K

The max. permissible current for the brake is 2A.
If a fault current is exceeded, error 68 "ERROR" overcurrent brake is triggered. The
response threshold of the error is between 2.5A and 4A.
Thus the brake control is short-circuit protected.
30
Customer evaluation of the brake control!
The brake control is influenced by other functions (e.g. position con-
trol) depending on the process.
➢ Always evaluate brake control in the customer application.
➢ List and test possible braking scenarios.
➢ Check scenarios again if changes are made in the application.
© 2022 KEB Automation KG