Control Type P - KEB COMBIVERT F6 Programming Manual

Hide thumbs Also See for COMBIVERT F6:

Table of Contents

Terminals short circuit protection

Thus the inverter is protected against destruction, but the 24V supply can failure

due to overload.

If the supply voltage does not failure, the inverter changes to the following errors:

Short circuit of a digital output

Short circuit of a 24V voltage output

Short circuit of the 24V encoder supply

Control type P

Description of the digital outputs see installation manual of the Pro control board

100 "ERROR overcurrent out1"

101 "ERROR overcurrent out2"

106 "ERROR overcurrent 24V"

105 "ERROR overcurrent en-

Combivert s6