Exposure Mode
The exposure mode can be selected from the following three ways.
For trigger operation, Exposure Mode must be set to something other than OFF and Trigger
Mode of Frame Start must be ON.
If Exposure Mode is set at Timed, the exposure operation can be selected as follows by setting
Trigger Option.
The effect of the combination of Exposure Mode, Trigger Option and Trigger Mode is as follows.
The combination of Exposure Mode, Trigger Option and Trigger Mode
Exposure Time
This command is effective only when Exposure Mode is set to Timed. It is for setting exposure
time. The setting step for exposure time is 1 μsec per step.
Minimum: 10 μsec
Maximum: 8 seconds (Note – noise may make image unusable after 1 second)
— 38 —
GO-5000M-PGE-UV