12-Bit Output; Roi(Regional Scanning Function) - JAI GO-5100MP-USB User Manual

12-bit Output

With this camera, when VideoProcessBypassMode is enabled, output with PixelFormat
as Mono12 or Mono12Packed is possible.
When VideoProcessBypassMode is enabled, video output is fixed to the RawImage
mode and the binning function and ROI function cannot be used.
ROI (Regional Scanning Function)
The ROI (region of interest) function allows you to output images by specifying the areas to
scan.
ROI Settings
Specify the area to scan by specifying width, height, and horizontal/vertical offset values
under [ImageFormatControl].
2464 Width Max
You can increase the frame rate by specifying a lower height, as the number of lines
scanned decreases.The setting ranges for the ROI function's readable area based on the
Binning setting (BinningHorizontal, BinningVertical) are as follows.
Scanning range
— 29 —
GO-5100MP-USB