Table of Contents
Advertisement
GO-5000M-PMCL-UV User Manual (Ver. 1.1)
③ Camera Link Cable
Connect the Camera Link cable to the Mini Camera Link connector.
Use a cable that supports the Camera Link standard and is compatible with Mini Camera Link
l
(SDR) connectors.
Refer to the specifications of the cable for details on its bend radius.
l
For details on the cable, see
l
Caution:
Refer to
connectors.
④ Frame Grabber Board
Refer to the operating instructions of the frame grabber board and configure settings on the computer
as necessary. (Use a computer that meets the requirements of your frame grabber board).
Step 2: Verify Camera Operation
When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera starts.
When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED. When properly turned
on, the power LED is lit green.
For details on how to read the LEDs, see the
③ ④ Camera Link Connector 1 and
Notes on Camera Link Cable Connections
when connecting the cables to the
② POWER/TRIG LED
- 19 -
2.
section.
Preparation
Advertisement
Table of Contents
