Programmable Feature Setting 10 - Xerox WorkCentre XD100 User Manual

Programmable Feature Setting 10

Use the following procedure to change the preset Reduction/Enlargement
default setting (
reduction or enlargement between 50 – 200%.
). This feature allows you to set a specific preset
1. Select the Toner Saver mode.
2. Press again and hold the Image Quality
key for approximately 4 to 6 seconds.
3. Press the 10 key until the number 10 is
displayed.
4. Press Start.
5. Press the variable percentage keys until
the desired percentage is displayed.
6. Press Start to store the selection.
7. Press the Clear key to continue making
other changes. Press the Image
Quality key to return to the copy mode.
The light next to Auto mode will light.
The lights within the WorkCentre
Diagram will flash.
The current reduction/enlargement
setting will flash.
33