Download Print this page

Xerox WorkCentre XD100 User Manual page 62

Xerox workcentre xd100: user guide
Hide thumbs

Advertisement

Problem
Character
voids
Background
scatter
Missing
characters
Back of
printout is dirty
Incorrect fonts TrueType fonts may be
Faded
graphics
54
Probable Cause
The paper may be too dry. Try printing with a different
The paper may be too
damp.
Printing over uneven
surfaces.
The paper may be too
damp.
The transfer roller may be
dirty.
disabled.
Toner may be low.
Remedy
batch of paper.
Try printing with a different
batch of paper. Do not open
packages of paper until
necessary so that the paper
does not absorb too much
moisture from the air.
If printing onto envelopes,
change your printing layout to
avoid printing over areas that
have overlapping seams on
the reverse side.
Try printing with a different
batch of paper. Do not open
packages of paper until
necessary so that the paper
does not absorb too much
moisture from the air.
Print a few blank pages to
clean the transfer roller.
Use the Fonts dialog box in
the Control Panel to enable
TrueType fonts.
Remove the toner cartridge
and shake it gently to evenly
distribute the toner. Then
reinstall the toner cartridge.
Ensure that you have a spare
toner cartridge.

Hide quick links:

Advertisement

loading

  Related Manuals for Xerox WorkCentre XD100