Table of Contents
Advertisement
Programmable Feature Setting 10
Use the following procedure to change the preset Reduction/Enlargement default setting (
This feature allows you to set a specific preset reduction or enlargement between 50 – 200%.
1. Select the Toner Saver mode.
2. Press again and hold the Image Quality key for
approximately 4 to 6 seconds.
The light next to Auto mode will light.
The lights within the Pro 215 Diagram will flash.
3. Press the 10 key until the number 10 is displayed.
4. Press Start.
The current reduction/enlargement setting will flash.
5. Press the variable percentage keys until the desired
percentage is displayed.
6. Press Start to store the selection.
7. Press the Clear key to continue making other changes.
Press the Image Quality key to return to the copy mode.
).
29
Advertisement
Table of Contents
