XE90QRG.BK Page 8 Wednesday, January 5, 2000 9:55 AM
P R O G R A M M A B L E F E A T U R E S E T T I N G S
Copy Quality
Copy Contrast
Indicators
Reduce/Enlargement
2.8
U s e r G u i d e
Message display
Indicators light up when there is a fault.
The fault codes will appear in the Message
Display.
Programmable Feature Settings
Settings 0 - 7, 14 and 15
To change the programmable features in
the chart on the following pages, follow
the steps below.
Toner Saver
Select the Toner Saver.
Photo
1
Text
Auto
Press again and hold the Copy Quality
2
button for approximately 4 to 6 seconds.
On-Line/
Clear
•
Off-Line
•
From the Programmable Features Chart
Ready
3
on page 2.11, select the Program Number
of the feature to be changed. Enter the
selection using the 10 button.
Press Start. The current setting for that
4
program will flash.
The light next to Auto will light.
The lights within the WorkCentre
Diagram will flash.