Loading Paper - Xerox WorkCentre XD100 User Manual

Loading Paper

will flash in the copy quantity display and the green indicator in the
copier diagram will flash when:
a paper tray is empty.
paper misfeeds: paper has not fed all the way into the copier.
a paper tray is not closed properly.
If the paper has misfed, open the paper tray indicated by the flashing green
light on the copier diagram and remove the misfed paper.
Do not reuse the misfed paper.
Ensure that the paper is under the corner snubbers.
Close the paper tray.
If copying, press the Start key to make the remaining copies.
If printing, the job will automatically resume when paper is added.
14
1. Lift and pull open the paper tray.
2. Push down on the pressure plate until it
locks in position.
Note: The procedures for loading paper
into tray 1 and tray 2 are identical.
3. Adjust the paper guides to the desired
paper size.
Squeeze the side guide.
Lift and insert the rear guide.
When adding paper larger than
8.5 11/A4, remove the rear guide
and store it in the pocket in front of
the side guide.