Download Print this page

Printing Solution Chart - Xerox WorkCentre XD100 User Manual

Xerox workcentre xd100: user guide
Hide thumbs

Advertisement

Problem Solving

Printing Solution Chart

Problem
The
WorkCentre
does not print
Half of the
page is blank
52
Probable Cause
The IEEE-1284 Parallel
cable is not connected
properly.
The IEEE-1284 parallel
cable is defective.
The port setting is
incorrect.
The toner and drum
cartridges are not installed
properly.
The printer driver may not
be installed properly.
The parallel port cable
specifications may not be
correct.
The page layout is too
complex.
The page orientation may
be incorrect.
There may be too many
applications open.
Remedy
Check the cable connection.
Check the cable with a
computer and printer that
work. If printing is still not
possible, replace the cable.
Check the printer settings in
the Windows Control Panel to
make sure that the print job is
being sent to the correct port.
(For Example: LPT1.)
Check that the toner and
drum cartridges are installed
properly.
Reinstall the WorkCentre
printing software.
Use the IEEE-1284 parallel
port cable supplied with the
machine or replace it with an
IEEE-1284 compliant cable.
Reduce the resolution setting
from 600 dpi to 300 dpi.
Install more RAM in the
computer.
Change the page orientation
in the printer setup dialog.
Try closing other applications
before printing.
Reduce resolution from
600 dpi to 300 dpi.
Install more RAM in the
computer.

Hide quick links:

Advertisement

loading

  Related Manuals for Xerox WorkCentre XD100