Making Copies On The Single Pass Feeder - Xerox WorkCentre Pro 16FX User Manual

Making Copies on the Single Pass Feeder

Use the Single Pass Feeder(SPF) to make one collated copy of originals or multiple uncollated
copies of one set of originals. The SPF holds up to 30 originals (20 lb/80 gsm) in one job. Ensure
originals are in good condition, and that all staples and paper clips have been removed. Use the
document glass to make copies from transparencies, facsimile paper, or originals having other
unusual characteristics. For reliable copying operation, use originals within the following ranges:
Paper weight range: 16 to 24 lb/60 to 90 gsm
Paper size range: 5.5 8.5"/A5, 8.5 11"/A4 and 8.5 14"/216 353 mm
tre Pr
1. Select the required paper tray.
2. Select the desired copy features from the control panel.
3. Adjust the paper guide to the original size.
Note: Writing that is very close to the leading or trailing
edge of the original may not copy. Turning the original
around in the SPF may help.
4. Insert up to 30 originals face up into the SPF until the
green SPF light on the copier diagram comes on.
5. Press Start.
The number in the display window returns to 1 and
advances as each copy is made.
Copying 15