Dialing And Transmitting; Direct Keypad Dialing - Xerox WorkCentre Pro 16FX User Manual

Dialing and Transmitting

Once you have set the document in the SPF or have scanned the document into memory from the
document glass and have made any desired transmission settings, you are ready to dial the
number of the receiving fax machine and transmit the document. You can choose from one of
several dialing methods to best suit your needs.

Direct Keypad Dialing

If the number of the fax you want to reach is not a Rapid key or Speed Dial number, use Direct
Keypad Dialing to manually enter it using the following procedure:
ABC
GHI JKL
PQRS TUV
1. Confirm that you have correctly placed the document in
DEF
the SPF or scanned the document into memory from the
MNO
document glass. See Setting the Document in this
WXYZ
section.
2. Enter the number of the fax machine you want to send
to by pressing the number keys.
3. Check the display. If the number of the receiving
machine is shown correctly, press the Start Fax key.
If it is not correct, press the Stop/Exit key to
backspace and clear one digit at a time and then
enter the correct number.
Sending a Fax 59