Xerox WorkCentre Pro 16FX User Manual page 10

Safety Notes
This Pro 16fx should be operated from the type of power source indicated on the marking label.
If you are not sure of the type of power available, consult your local power company.
Do not allow anything to rest on the power cord. Do not locate the Pro 16fx where persons will
step on the cord.
The power supply cord is the disconnect device for this equipment. Insure that installation is
near the outlet and is easily accessible.
Your machine is equipped with an energy saving device to conserve power when the machine is
not in use. The machine may be left on continuously.
Slots and Openings in the cabinet and in the back and sides of the Pro 16fx are provided for
ventilation. To ensure reliable operation of the Pro 16fx and to protect it from overheating, these
openings must not be blocked or covered. The Pro 16fx should never be located near or over a
radiator or heat register. This Pro 16fx should not be placed in a built-in installation unless proper
ventilation is provided.
Never push objects of any kind into the slots of the Pro 16fx as they may touch dangerous voltage
points or short out parts which could result in a fire or electric shock.
Never spill liquid of any kind on the Pro 16fx.
Never remove covers or guards that require a tool for removal. There are no casual operator
serviceable areas within these covers.
Never defeat interlock switches. Machines are designed to restrict operator access to unsafe
areas. Covers, guards, and interlock switches are provided to ensure that the machine will not
operate with covers opened.
Use of an extension cord with this Pro 16fx is not recommended or authorized.
Avoid direct viewing of the document lights. The lamps are bright and, while not harmful, they
may cause an annoying afterimage. Always keep the document cover closed during operation
and storage.
Avoid exposing the drum cartridge to light for extended periods of time.
vi Preface