Plug-N-Play (Pnp) Printer Driver Installation - Xerox WorkCentre Pro 16FX User Manual

Installation for Windows 3.1x
8. Choose File from the menu bar in Program Manager, and then choose the Run... command.
9. Type D:\SETUP (or the appropriate drive letter depending on your CD-ROM Drive) in the
command line box. Click on the OK button to proceed.
10. Follow the on-screen instructions.
11. When the install is complete, restart Windows and turn on the Pro 16fx.
Installation for Windows NT 4.0 or 95/98
8. Click on the Start button and then choose the Run menu option.
9. Type D:\SETUP (or the appropriate drive letter depending on your CD-ROM Drive) in the
command line box. Click on the OK button to proceed.
10. Turn on the Pro 16fx.
11. Follow the on-screen instructions.
If you wish to print a test page, ensure paper is loaded and then click Yes.

Plug-n-Play (PnP) Printer Driver Installation

1. If Your PC operating system is set to identify PnP devices, the new WorkCentre will be
detected through the PC connection port. At the "Add New Hardware" dialog, click Next to
proceed. The PnP installation will start SETUP.EXE from the Xerox software CD-ROM.
2. Follow the on-screen instructions for installing the print driver.
3. The WorkCentre Pro PnP print driver will be installed on your PC.
114 Printer Driver
(continued from step 7)
(continued from step 7)