Pro 16Fx Properties (Printer Driver); Displaying The Driver Properties Dialog From An Application - Xerox WorkCentre Pro 16FX User Manual

Pro 16fx Properties (Printer Driver)

The purpose of this section is to provide information about how to access and use the options in
the WorkCentre Pro Series Printer Driver Properties dialog. Use the WorkCentre Pro Series
Properties dialog to change the settings used for printing.
There are several ways to display the Printer Driver dialog, including:

Displaying the Driver Properties dialog from an application

Displaying the Properties dialog from the Start Menu
Displaying the Properties dialog from the Xerox Printer Services Program (Status Monitor)
Displaying the Driver Properties dialog from an application
Control of the driver settings is provided from the WorkCentre Pro Series Properties (Printer
Driver) dialog box. The new driver settings will be active while the application is open. The
driver settings will return to the prior values when the application is exited.
Access to the Properties dialog will vary depending upon the application that is in use.
Note: The application may override any options that are selected using the Properties Dialog.
Windows 95/98 and NT:
1. Click Print on the application's File menu
2. If not selected, select the Xerox WorkCentre Pro Series printer
3. Click the Properties button
4. Change the print options and click OK
Windows 3.1x:
1. Click Print on the application's File menu
2. Click the Printer Setup button
3. If not selected, select the Xerox WorkCentre Pro Series printer
4. Click the Options button
5. Change the print options and click OK
Printer Driver 115