Xerox WorkCentre Pro 16FX User Manual page 148

Printer Problem Solving
Problem
Printing is too slow
Irregular faded
patches of print
Black staining
136 Problem Solving
(continued)
Probable Cause
The computer parallel port may
not be set for high speed
communications.
If using Windows 3.1x, the
background printing item in the
options menu of print manager
may be set incorrectly.
If using Windows 95, the spool
setting may be set incorrectly.
Computer may not have enough
memory (RAM).
Print Job to large
There is a paper quality problem.
Toner may be unevenly
distributed.
There is a paper quality problem.
Remedy
If your computer is equipped with
an ECP parallel port, enable this
mode of operation. Refer to the
Enabling High Speed Printer
Communications section and
your PC's user guide.
Select Background Printing from
the options menu of print manger.
Point to the Start Task bar and
then click Settings then Printers.
Click the Xerox WorkCentre
Pro16fx with the right mouse
button. Click Properties and then
spool settings on the details tab.
Select the desired setting from the
available choices.
Install more RAM in your
computer.
Reduce resolution from 600 dpi to
300 dpi.
Use only paper that meets the
specifications required by the
printer.
Remove the toner cartridge and
shake it gently to evenly distribute
the toner. Then reinstall the toner
cartridge.
Use only paper that meets the
specifications required by the Pro
16fx.