Copying From The Single Pass Feeder; Two-Sided Copying - Xerox WorkCentre XE90 User Manual

XE90QRG.BK Page 14 Wednesday, January 5, 2000 9:55 AM
C O P Y I N G F R O M T H E S I N G L E P A S S F E E D E R
Note: Use the Release Button on the
Single Pass Feeder (located in top rear
of the SPF) to remove jams.
Note: Although not designed for this
purpose, you may use the XE90fx for

two-sided copying.

Note: 16 lb/60 g/m
recommended for two-sided copying.
2.14
U s e r G u i d e
2
paper is not

Copying from the Single Pass Feeder

Place originals face down in the Single
1
Pass Feeder. (Maximum of 30.)
Adjust the side guide within 1/32 in.
2
Press the Start button on the Control
3
Panel.
The copy will exit to the paper output
4
support tray.
Two-Sided Copying
Place one original face down on the
1
Document Glass, with the TOP toward the
LEFT. Lower the document cover.
Select the quantity of 1. To maintain copy
2
quality run one copy at a time.
Press Start to make side 1 copy.
3