Pro 16Fx Care; Cleaning The Document Glass And Cover; Cleaning The Corotron Wire - Xerox WorkCentre Pro 16FX User Manual

Pro 16fx Care

Cleaning the Document Glass and Cover

Keeping the document glass clean helps ensure the best possible copies. Xerox suggests that
you clean the document glass at the start of each day and during the day as needed.
CAUTION: Do not pour or spray water directly onto any part of the copier.

Cleaning the Corotron Wire

If copies start getting streaks or blotches, the corotron wire may be dirty.
1. Slightly dampen a soft lint-free cloth or paper towel with
water.
2. Wipe the surface of the document glass until it is clean
and dry.
3. Wipe the underside of the white document cover until it
is clean and dry.
4. Close the document cover.
Note: Ensure that the alternate paper tray is lowered.
1. Press the release latch to open the side cover.
2. Remove the green corotron wire cleaner from inside the
copier (near the front corner of the machine).
3. Insert the corotron cleaner into the corotron wire unit.
4. Wipe the corotron wire with the corotron cleaning tool as
shown.
5. Replace the cleaner and close the side cover.
Copying 25