Xerox WorkCentre Pro 16FX User Manual page 17

Installation
(continued)
6. Secure the paper tray button and the shipping screw in
the locations shown.
Turn the paper tray button to secure its storage
position.
Note: Save the paper tray button and the shipping screw.
They will be needed if the Pro 16fx has to be moved.
7. Load paper into the tray.
Refer to the Loading Paper section for additional
information.
Do not fill above the max line.
8. Push the paper tray firmly back into the Pro 16fx.
Note: Ensure that the alternate paper tray is lowered.
9. Press the release lever to open the side cover.
10. Remove the Caution tape from the cover.
11. Remove the two red fuser pins by pulling the string
upward one pin at a time.
Discard the fuser pins.
Note: Misfeeds will occur if the fuser pins are not
removed.
CAUTION: Ensure that the side cover is always open
before opening the front cover.
12. Press the front cover release buttons to open the front
cover.
Ä
Installation 5