Xerox WorkCentre Pro 16FX User Manual page 16

Installation
(continued)
Set up your Xerox Pro 16fx.
4 Installation
1. Remove the bag from the Pro 16fx.
2. Remove the pieces of tape and the packing material.
3. Open the Single Pass Feeder (SPF) and remove the
packing materials shown.
4. Unscrew and remove the shipping screw from the left
side of the Pro 16fx.
CAUTION: The Pro 16fx will malfunction if the shipping
screw is not removed.
5. Lift and pull open the paper tray. Turn and remove the
paper tray button.
CAUTION: Paper will misfeed if the paper tray button is
not removed.
Note: Be sure to remove the pressure plate lock from both
paper trays.
Ä