Printer Driver Software Installation (Xe80, Xe82) - Xerox WorkCentre XE80 User Manual

Printer Driver Software Installation (XE80, XE82)

The printer driver software is the program which runs the printer. It converts
the data in the file you want to print into information that the printer can
understand. It also controls communication between the printer and
computer as the data is printed.
You will need the following PC hardware and software in order to use the
printer driver:
Computer type
Operating system
CPU
RAM
IEEE-1284 parallel
cable
If your PC does not have a CD-ROM Drive:
If you have access to a computer with a CD-ROM drive and a floppy disk
drive, the WorkCentre XE CD-ROM has a program to create a set of
installation diskettes.
NOTE: Refer to Creating WorkCentre XE Floppy Disk Installation
Diskettes section in this User Guide for instructions on making your own
floppy diskettes.
There are two other options available to you. Refer to the order sheet that is
packaged with the WorkCentre XE. This sheet explains how you can:
download the necessary software from the WEB site at:
http://www.teamxrx.com
order floppy diskettes from Xerox.
WorkCentre XE Series
IBM PC/AT or Compatible Computer
Windows 3.1x, Windows 95, Windows 98,
Windows NT 4.0
486DX 66 MHz or better
8 MB or more
To ensure reliability use the IEEE-1284
compliant parallel cable that is supplied with
the machine. Only cables labeled "IEEE-1284"
can be used with your WorkCentre.
29