Printer Driver Installation
This section describes how to install the printer driver for the Mac OSX using the AppleTalk
protocol.
Installation Procedure
This section describes the procedures for installing the Mac print driver.
Ensure the printer is on and that AppleTalk has been enabled (see "Network
1
Communication Setup" on page 5-3).
Select [Printer Setup Utility] and click the [Add] button.
2
Choose the WorkCentre/FaxCentre with the AppleTalk connection from the drop-down
3
menu.
Choose Xerox WorkCentre 4118 PS or Xerox FaxCentre 2218 PS as the printer driver.
4
Click the [Add] button.
5
Continue with Test Print, see Test Print 8-16.
6
Setting the Printer Driver
When you finish installing the printer driver, set the PostScript Printer Description (PPD) file
for this machine to the printer driver.
The printer driver controls the functions of this machine based on the information in the PPD
file.
Ensure the printer is on and that AppleTalk has been enabled (see "Network
1
Communication Setup" on page 5-3).
Page 5-6
All printers on the subnet will be listed.
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide