Using Centreware Internet Services To Configure Settings On The Machine; Proxy Server Settings - Xerox WorkCentre 7132 System Administration Manual

4 CentreWare Internet Services
Using CentreWare Internet Services to Configure Settings on
the Machine
This section provides the full listing of the items that can be set for each port through
CentreWare Internet Services.
For a description about each item, refer to the CentreWare Internet Services chapter of
the User Guide. Refer to [Properties] > [Proxy Server Settings], [Port Settings] or
[Protocol Settings] for links to each page.
NOTE: The following items display only if the port is activated. To activate a port
through CentreWare Internet Services, select [Port Status], and then the required port.
Proxy Server Settings – page 50
Ethernet – page 51
USB – page 52
EtherTalk – page 53
SMB – page 53
NetWare – page 54
TCP/IP – page 55
LPD – page 56
SNMP – page 57
IPP – page 58
Port9100 – page 59
E-mail – page 59
HTTP – page 62
UPnP – page 62
SSDP – page 63
LDAP – page 63
Web DAV – page 64
Bonjour – page 64

Proxy Server Settings

This page allows you to configure the proxy server settings for the communication
protocols.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Proxy Server
Settings] folder.
3.
Set up the following option to be displayed in the frame.
50 Xerox WorkCentre 7132 System Administration Guide