Configuring Ip Settings In Xerox ® Centreware ® Internet Services - Xerox B1022 System Administrator Manual

4. Select TCP/IPv4→Static.
5. To set the Primary DNS and Secondary DNS addresses, select Primary DNS or Secondary DNS.
a. To enter the address, use the arrow buttons or the alphanumeric keypad.
b. Press OK.
C C o o n n f f i i g g u u r r i i n n g g I I P P S S e e t t t t i i n n g g s s i i n n X X e e r r o o x x
I I n n t t e e r r n n e e t t S S e e r r v v i i c c e e s s
If your printer has a valid network address, you can configure TCP/IP settings in Xerox
Internet Services. For details, refer to
C C o o n n f f i i g g u u r r i i n n g g I I P P v v 4 4
You can use IPv4 or IPv6 in addition to or in place of the other.
1. In Xerox ® CentreWare
2. Click TCP/IP.
3. For Protocol, select Enabled.
4. For Host Name, type a unique name for your printer.
5. For IP Address Resolution, select an option. Fields that appear depend on the option that you
select.
• STATIC: This option disables dynamic addressing and allows you to type a static IP address.
Type the Machine IP Address, Subnet Mask, and Gateway Address.
• BOOTP: This option allows the printer to obtain an IP address from a BOOTP server that does
not respond to DHCP requests.
• DHCP: This option allows your DHCP server to assign an IP address to the printer. Dynamic
DNS Registration is enabled.
6. For Domain Name, type the fully qualified domain name of your authentication server.
7. For DNS Configuration, type the IP address for up to three servers.
8. To send a release request to the DHCP and DNS servers, for Dynamic DNS Registration, select
Enabled. If the servers grant the request, when the printer is powered off, the current IP address
and dynamic DNS name are released.
9. For Zero-Configuration Networking, perform the following steps.
• To configure the printer to assign itself an address if a DHCP server does not provide one, for
Self-Assigned Address, select Enabled.
• To allow users to see and connect to the printer using Bonjour, for Multicast DNS, select
Enabled.
10. Click Apply.
Assigning a Network
® Internet Services, click Properties→Connectivity→Protocols.
C C e e n n t t r r e e W W a a r r e e
® ®
Address.
Xerox ® B1022 Multifunction Printer
System Administrator Guide
Network Connectivity
® ®
® CentreWare ®
21